Chemistry News
skeptics
physic
chemistry

New cathodes can lead to smaller, more powerful lithium batteries

08/08/2019 / By Edsel Cook


A joint effort between American and Chinese researchers have delivered a new take on the cathode of a lithium battery. Their prototype negatively-charged electrode will help reduce the size and weight of energy storage systems.

A smaller, lighter lithium battery makes it possible to fit more cells aboard electric vehicles, extending their range and endurance. It also extends the operating time of smartphones, mobile devices, and other portable electronics that run on battery power.

In the study, which was supported by the Massachusetts Institute of Technology, the researchers developed a hybrid cathode that borrows from two separate techniques of increasing energy density.

The gravimetric approach boosts the amount stored and released by each pound of battery. Meanwhile, the volumetric method improves the performance of every liter of energy storage material.

By combining the gravimetric and volumetric approaches, the researchers created a battery that possessed the strengths of both energy density-boosting techniques. Further, the synergy provided additional useful effects.

Transition metal oxides serve as the materials for the cathodes of most current lithium-ion batteries. Due to the considerable mass of the oxide-based cathode, some cells switch to sulfur-based cathodes to save weight. (Related: Engineers develop high energy density all-solid-state batteries.)

A hybrid with the strengths of two different types of cathode

There are two ways to make a cathode for a lithium battery. The intercalation method uses lithium cobalt oxide in the negatively charged electrode.

Intercalation-type cathodes deliver volumetric energy density. They maintain the crystal-like shape of their internal lattice despite the constant addition and removal of lithium atoms.

Meanwhile, the conversion type cathode swaps out the oxide for sulfur. The alternative material changes its structure to accommodate or release lithium ions. It may even melt in the electrolyte.

“Theoretically, these [batteries] have very good gravimetric energy density,” explained MIT researcher Ju Li. “But the volumetric density is low.”

Sulfur-based conversion cathodes need more materials, such as additional electrolytes and carbon (which may be acquired from recycled plastic bags).

The MIT-led research team found a way to combine the gravimetric and volumetric approaches. They built their hybrid cathode out of pure sulfur and Chevrel-phase, a sulfide compound that combines sulfur with the transition metal molybdenum.

To produce the solid cathode, the researchers squeezed together particles of both sulfur and Chevrel-phase. The resulting material conducts electricity quite well, so it doesn’t need as much carbon as a pure sulfur cathode.

In turn, decreasing the number of materials also reduced the total volume of the electrode.

New sulfur-molybdenum sulfide cathode will boost energy densities of lithium batteries

The energy densities of a typical lithium-ion battery amount to 250 watt-hours per kilogram (w-h/kg) and 700 watt-hours per liter (w-h/L). If it has a pure sulfur cathode, its gravimetric energy density increases by 400 w-h/kg. However, its volumetric equivalent drops to 400 w-h/L.

In comparison, a battery with the prototype sulfur-molybdenum sulfide cathode reached more than 360 w-h/kg and 581 w-h/L. It delivered the best of both types.

Li believed that his team could raise the battery’s performance to 400 watt-hours/kg and 700 watt-hours/L. A hybrid cell would match the volumetric energy density of a commercial lithium-ion battery while exceeding the latter’s gravimetric energy density.

Further, they skipped the usual approach of testing the hybrid cathode on coin cells with small energy capacities. They went straight to the three-layer pouch cell that made up the lithium-ion batteries in electric vehicles and other electronic products.

The main drawback of the new battery is its shorter lifespan. It can go through the charging-discharge cycle fewer times than a lithium-ion cell.

The MIT researchers added that the problem lay with the battery’s general design. Their sulfur-molybdenum sulfide cathode, however, was ready for use and would only get better with further optimization.

Sources include:

ScienceDaily.com

Nature.com

Tagged Under: batteries, battery technology, breakthrough, Chemistry, electricity, electronics, goodtechnology, inventions, lithium batteries, lithium-ion battery, new materials, portable power, sulfur, technology breakthrough



Comments

RECENT NEWS & ARTICLES

New cathodes can lead to smaller, more powerful lithium batteries
08/08/2019 / By Edsel Cook
Engineers develop high energy density all-solid-state batteries
08/05/2019 / By Edsel Cook
Are people really considering going to the moon… to mine?
08/04/2019 / By Edsel Cook
For us, it’s poison. For space, it’s alien life
08/03/2019 / By Edsel Cook
Scientists synthesize eco-friendly lubricant oils from sustainable, organic waste
07/31/2019 / By Stephanie Diaz
Cocklebur shows promise as an alternative biodiesel source
07/25/2019 / By Melissa Smith
Nanotechnology may one day allow people to SEE in the dark
07/22/2019 / By Paul Waters
From tires to shoes, disposable rubber items may soon be able to self-repair
07/16/2019 / By Edsel Cook
Scientists may have discovered a new source of rare earth elements – and an environmentally friendly way to gather them
07/11/2019 / By Edsel Cook
For 30 years, the Dept. of Energy and “scientific establishment” has blocked the truth about cold fusion (Low-Energy Nuclear Reactions), the ultimate “renewable” energy solution for humanity
07/08/2019 / By Mike Adams
Solar winds deposit ingredients for water on the moon
07/07/2019 / By Edsel Cook
Renewable fire-retardant coating developed by researchers
07/02/2019 / By Edsel Cook
Study: New “self-assembling” nanomaterials can soon be used to develop efficient, affordable solar power
07/01/2019 / By Edsel Cook
Lab-on-a-chip (LOC) technology: Once manufactured in a scalable, cost-effective way, researchers hope LOC can revolutionize medicine
06/30/2019 / By Edsel Cook
Could plastic bags be upcycled into parts for lithium-ion batteries?
06/20/2019 / By Edsel Cook
Green and clean: Energy-efficient water purification system developed by scientists
06/14/2019 / By Edsel Cook
Researchers working to develop electronic nose device to instantly detect the release of harmful toxins into the environment
05/29/2019 / By Edsel Cook
Breakthrough device can easily and accurately measure fluoride concentrations in water
05/26/2019 / By Ethan Huff
Can magnesium batteries revolutionize battery technology?
05/20/2019 / By Edsel Cook
Researchers are developing an energy-efficient method of converting methane into carbon nanotubes
05/19/2019 / By Edsel Cook

COPYRIGHT © 2017 CHEMISTRY NEWS

Privacy Policy